← Back to blog

eSIM Not Working? Fixes for No Service, No SIM and No Internet

November 17, 2026
eSIM Not Working? Fixes for No Service, No SIM and No Internet

Most eSIM problems come down to one of four causes: the plan line is switched off, data roaming is off for that line, the profile never finished installing, or the phone has not registered on a local network. Each has a short fix. The trick is to read what your screen says first, because "No SIM", "No Service" and "connected but no internet" point to different problems. This guide walks you through each one on iPhone and Android, in the order that saves the most time while you are standing in an airport arrivals hall.

Kivoesim
Stay Connected on Your Next Trip
Kivo provides high-speed mobile data in 165 countries, with QR-code setup and your personal phone number kept active.
Visit

TL;DR

  • "No SIM" or a missing eSIM usually means the profile is not installed or the line is turned off. Check that the plan exists and the line is on.
  • "No Service" or "Searching" means the phone is not registered on a network. Toggle Airplane Mode on for at least 15 seconds, then off, and restart.
  • Signal bars but no internet is almost always a data-line, data-roaming or APN setting. Set the travel eSIM as your cellular data line and turn roaming on for it.
  • Do not delete the eSIM first. A deleted profile often cannot be reinstalled from the same QR code, so you would be buying a new plan.
  • Keep your home SIM active for calls, texts and two-factor codes, and let the travel eSIM carry data only.

Table of Contents

Start with what your screen says

Before you change any setting, match your symptom to its likely cause. This stops you from restarting a phone when the real problem is a switch you never flipped.

What you seeWhat it usually meansFirst thing to try
No SIM, Invalid SIM, or no eSIM listedProfile not installed, line off, or plan inactiveCheck Settings for the line and turn it on
No Service, Searching, or SOS onlyPhone is not registered on a mobile networkAirplane Mode on for 15+ seconds, then off
Bars showing, apps will not loadWrong data line, roaming off, or APN issueChoose the travel eSIM for cellular data and enable roaming
Error while installing or activatingWeak connection during setup or an activation server delaySwitch to reliable Wi-Fi and retry
Connects, then dropsWeak coverage, network switching, or a line togglingRestart, then set the network to automatic
Works but crawlsCongested network or weak signalMove location, toggle Airplane Mode

One more point that saves frustration: a phone that says "No SIM" while you hold an eSIM-only device is not necessarily broken. Many US-bought iPhones no longer have a physical SIM tray, so the message simply means no cellular profile is active.

What "No SIM" and "No SIM available" mean

The message means the phone cannot find an active SIM or eSIM profile to use. On an iPhone, Apple's guidance for "Invalid SIM" or "No SIM Card installed" is to confirm you have an active plan, check that Carrier Lock shows No SIM restrictions, restart, and check for a carrier settings update. For eSIM devices, Apple sends you back to the provider that issued the plan.

On a Pixel, a grey operator name with a No SIM message means either no SIM is present or the SIM is inactive, and the fix is to open Settings > Network and Internet > SIMs and turn on Use SIM. Other Android makers label these menus slightly differently, but the switch is nearly always under a SIMs or SIM manager page.

Work through it in this order:

  1. Open the SIM or Cellular settings and look for your travel line. If it is listed, make sure it is switched on.
  2. Restart the phone. A freshly installed profile sometimes only appears after a restart.
  3. Check the phone is unlocked. On iPhone, go to Settings > General > About and look for "No SIM restrictions" beside Carrier Lock. A phone locked to its original carrier will reject a travel eSIM.
  4. Check the profile is actually installed. If no second line is listed, the QR code was never fully processed. Reinstall from the original QR code or the in-app Install button, which is why keeping that email or app screen matters.

Fix "No Service" or "Searching"

"No Service" and "Searching" mean the phone is not connected to any mobile network. Apple describes it exactly that way and gives the same first step for both: turn Airplane Mode on for at least 15 seconds, then off. Then:

  • Check the line is on. If you use two lines, open Settings > Cellular and confirm the travel line is switched on. A line that is off will show no service.
  • Set network selection to automatic. Manual selection can leave you searching for a network that is not available where you landed.
  • Move. Basements, trains and airport jet bridges are poor places to register on a new network. Try near a window or outside.
  • Restart the phone. This forces a fresh network registration.
  • On iOS 18 or later, the Apple Support app can run additional diagnostics to help identify the source of the problem.

If none of that works, the cause may sit on the network side: coverage in your location, an outage, or the device being barred. Only the plan provider can verify those. Apple's checklist also mentions that some countries require phones bought abroad to be registered by IMEI, which is worth knowing before a long stay.

Signal bars, but no internet

This is the most common travel eSIM complaint, and the phone usually is not broken. Calls and texts on your home number may work while the travel line has no data, because the phone is sending data over the wrong line or the line is not allowed to roam.

Check the cellular data line

If you have two lines, your phone uses only one for mobile data at a time.

  • iPhone: Settings > Cellular (or Mobile Service) > Cellular Data, then choose the travel eSIM.
  • Android: Settings > Network and Internet > SIMs, then set the travel eSIM as the mobile data SIM. Menu names vary by manufacturer.

Also turn off any setting that lets the phone switch data lines automatically, if your phone offers it, so it does not quietly fall back to your home line and its roaming charges.

Turn on data roaming for the travel line

A travel eSIM works on a foreign network, so the phone treats it as roaming. In the line's settings, switch Data Roaming on for the travel eSIM only. Leave roaming off on your home SIM so it cannot run up charges in the background.

Check the APN

Check the APN

The APN (access point name) is the setting that tells your phone how to reach the mobile data network. Most eSIMs configure it automatically at installation. If the line shows signal but no data after all the steps above, open the line's Cellular Data Network settings (iPhone) or Access Point Names (Android) and compare the values with the ones in your eSIM's installation instructions. A single mistyped character is enough to stop data.

Rule out the simple causes

  • The plan's data allowance or validity period may have run out.
  • The eSIM may be installed but not yet activated. Many plans start only when the phone first connects in the destination country.
  • A VPN or Low Data Mode can make a working connection look dead. Turn them off briefly to test.
  • Toggle Airplane Mode for 15 seconds. It is a cheap fix that clears many stuck connections.

The eSIM will not install or activate

Installation needs a stable internet connection, which is why the order of operations matters: install the eSIM on home or hotel Wi-Fi before you rely on it, not on a weak mobile signal.

Apple's official steps for an eSIM that will not set up are to toggle Airplane Mode, check whether the number appears in Settings > Cellular, turn the line off and on, restart, and look for a carrier settings update under Settings > General > About. If it still fails, Apple says to contact the provider with the error message, the phone number, any account PIN or password, and the phone's IMEI or EID. These are the two serial numbers that identify your phone and its eSIM chip, and you can find both under Settings > General > About.

For an activation error, Apple's guidance says to restart, switch from mobile data to reliable Wi-Fi, and, if the activation server is unavailable, wait a few minutes and retry.

Some practical points that prevent the usual mistakes:

  • A QR code is generally good for one installation. Scan it once, and do not try again after a profile has been created, or you may end up with a duplicate or a rejected scan.
  • Scan from a second screen. The QR code cannot be scanned from the same phone's screen in the usual way, so open it on a laptop, tablet or printed page. Many apps avoid this by offering an Install button on the same phone.
  • Check the phone supports eSIM and is not locked to a carrier before buying a plan.

The eSIM keeps disconnecting or runs slowly

A connection that drops and returns is usually a coverage or network-selection issue, not a faulty profile.

  1. Check where you are. Moving between buildings, trains or rural stretches causes drops because the phone hops between towers.
  2. Toggle Airplane Mode for at least 15 seconds to reconnect to the strongest available tower.
  3. Restart the phone to reset the radio.
  4. Leave network selection on automatic so the phone can move to whichever partner network has the best signal.
  5. Keep the OS updated. Apple's guidance includes a check for carrier settings updates, which can resolve connection bugs. On Android, install pending system updates.
  6. Check background use. Cloud backups, photo syncs and app updates can eat the allowance and slow everything else. Pause them or restrict them to Wi-Fi.

If speeds stay slow in a crowded place like a stadium or a festival ground, the network itself is congested, and a short walk away often helps.

Is the eSIM profile or the phone broken?

Rarely. Before you assume hardware damage or delete anything, run this sequence:

  1. Test with Wi-Fi on and mobile data off, to confirm the phone itself works.
  2. Check whether the profile is listed in the SIM or Cellular settings and turned on.
  3. Restart and toggle Airplane Mode once more, then wait a minute for the phone to register.
  4. Check for software updates and a carrier settings update.
  5. Look at the symptom pattern. If your home SIM works normally while the travel line does not, the phone hardware is fine and the issue is the profile, its settings or local coverage. If neither line works, a restart or an OS update is the next step.
  6. Do not delete the eSIM or erase the phone as a first reaction. A deleted profile may not be re-downloadable, and an erase is only worth it on the provider's or Apple's instructions.

Hardware service is the last resort. Apple's own order of events is that the provider rules out account and network issues first, and only then is the device itself suspected.

When to contact your provider, and what to have ready

Contact the provider that issued the eSIM when you have worked through the steps above and still see no service or no data. Contact your phone's maker if the provider confirms the plan and network are fine and the problem follows the phone across several SIMs or eSIMs.

Have this ready so the first reply can solve it:

  • The exact on-screen message and a screenshot.
  • Your phone model and software version.
  • The IMEI and EID, found in Settings > General > About on an iPhone.
  • The country and city where the problem happens.
  • What you already tried, so you are not sent back through the same steps.

The provider can check what you cannot from the phone: whether the account is active, whether your location is covered, whether there is an outage, and whether the phone is barred or needs registering. If you are using your home carrier's SIM and it is the one that fails, that carrier is the one to call.

How Kivo helps you avoid most of these problems

Many of the failures above come from a messy setup: a QR code scanned on the wrong screen, the wrong data line, or a home SIM left roaming. Kivo is built to avoid that. You install by scanning a QR code or tapping Install in the app, which gets you online in under a minute, and you keep your personal SIM active for calls, WhatsApp and two-factor authentication while the Kivo eSIM handles data. It covers 165 countries with country, regional and global plans, so you can pick the one that matches your route.

Kivoesim

If you are planning a trip, choose a Kivo country, regional or global plan and install it on Wi-Fi before you fly.

Set up once, avoid trouble later

A few habits stop most issues before they begin:

  • Install on Wi-Fi before departure, then leave the line off until you land so the plan does not start early.
  • Confirm the phone is unlocked and supports eSIM before you buy.
  • Name the lines clearly (for example Home and Travel) so you set data and roaming on the right one.
  • Set Cellular Data to the travel line and turn roaming on for it when you land.
  • Keep your home SIM on for banking codes and calls, with its roaming off.
  • Save the QR code or keep the app installed in case you need to reinstall.
  • Update your phone before the trip so carrier settings are current.

FAQ

Why does my eSIM say No Service?

No Service or Searching means your phone is not registered on a mobile network. Turn Airplane Mode on for at least 15 seconds and off again, make sure the eSIM line is switched on, and restart. If it persists, the plan provider can check account status, coverage and outages.

Why is my eSIM connected but there is no internet?

Usually the phone is sending data over the wrong line or roaming is off for the eSIM. Set the travel eSIM as your cellular data line, turn Data Roaming on for that line, and check the APN settings against your installation instructions. Also confirm the plan has data left and has activated.

What does "No SIM available" mean on my phone?

It means the phone finds no active SIM or eSIM profile. Check that the line is switched on in your SIM or Cellular settings, that the profile is installed, and that the phone is unlocked. On an eSIM-only phone, a missing SIM tray is normal.

Should I delete my eSIM and install it again?

Not as a first step. A QR code is usually valid for a single installation, so a deleted profile may not come back. Try Airplane Mode, a line toggle, a restart and an update first, and reinstall only if the provider tells you to.

How do I know if my phone or my eSIM is the problem?

If your home SIM works normally and only the travel line fails, the phone is fine and the cause is the profile, its settings or local coverage. If both lines fail even after a restart and an update, contact the provider and then the phone maker.

Sources

Made with BabyLoveGrowth